Our store
Six machines, one room, five crafts happening side-by-side. Here's what you walk into.
The lineup
What we have, what each one handles, and roughly how busy it is.
[PLACEHOLDER — e.g., Bambu Lab X1-Carbon]
Our workhorse for functional parts, prototypes, and larger print runs.
[PLACEHOLDER — e.g., Elegoo Saturn 3]
For anything that needs sharp detail — figurines, ring masters, intricate geometry.
[PLACEHOLDER — e.g., 60W desktop CO₂]
Clean kerfs, crisp engraving, and the constant smell of toasted basswood.
[PLACEHOLDER — our own bench setup]
A dedicated pour bench with heated curing so pieces set properly in winter.
[PLACEHOLDER — e.g., Epson F2100 + 16×20 press]
Between the two, we cover everything from one-off custom tees to full team kits.
[PLACEHOLDER — e.g., Roland GS-24]
Handles everything from a laptop sticker to a full storefront window graphic.
The vibe
There's always something running. Filament hissing out of a nozzle, the laser humming, resin curing under UV lights, music playing from a dented bluetooth speaker that's been through three moves. You'll probably smell melted PLA and fresh-cut plywood at the same time. We think that's the whole point.
When you arrive
Street parking along Bruce St is free after 6pm and on weekends. Weekday daytime is a 2hr limit. There's also a small lot behind the building — enter from the alley off Bruce St.
Look for 253 Bruce St — second unit from the corner with the yellow sign above the door. Press the bell once; we'll come down. Doors are locked during working hours so the machines stay dust-free.
A working studio — machines may be mid-run. We'll have your piece ready on the counter and the kettle is always on. Expect a 5–10 minute chat about the piece before you head back out.
Visiting hours
We're a working studio without a storefront counter. To make sure your piece is ready and someone can actually say hi, every visit is by appointment.
Saturday 1–4pm is our recommended drop-in window — machines are quieter then.
Message us on WhatsApp with a day and window that works, and we'll lock it in.
Full contact details on our contact page